Motores de
Stock

Categoría: VERTICALES EJE SOLIDO

MAX-PE TEFC SS LOW VOLTAGE NORMAL THRUST WITH “P” BASE

Three Phase, 60 Hz, 1.15 Service Factor (Continuous); 50 Hz, 1.0 Service Factor (Continuous)
Factory Self-Certified for Class I, Div. 2, Groups B, C, D - Temp Code T3C Minimum
Class F Insulation
Class B Temperature Rise
NEMA Design B Torques as a Minimum; Various Ratings also Meet Design C
Cast Iron Frame, End Brackets, Main Conduit Box; Rolled Steel Fan Cover
Grounding Terminal Inside Main Conduit Box
Oversized Main Conduit Box Rotatable in 90 Degree Increments - F1 Mounted
Designed for 40˚C Ambient Temperature
Designed for 3300 ft. Elevation
Bi-Directional Rotation
1045 Carbon Steel Shaft
Aluminum Die Cast Squirrel Cage Rotor Construction
Paint System: Phenolic Rust Proof Base Plus Polyurethane Top Coat
Paint Color: Dark Gray - Munsell 7.5B 3.5/0.5
Double Shielded Bearings Pre-Packed with MULTEMP SRL for F# 140T - 280T (Non-regreasable)
High Quality Ball (or Roller) Bearings Regreasable with Mobil Polyrex™ EM for F# 280TS and Larger
Automatic Grease Discharge Fittings on Regreasable Models
Labyrinth Type Metal Flinger on Both Ends for F# 280TS and Larger
Cast Iron Inner and Outer Bearing Caps for F#280TS and Larger
Stainless Steel Nameplate
Suitable for Inverter Duty per NEMA MG-1, Part 30
Inverter Duty Speed Range: 20:1 Variable Torque, 10:1 Constant Torque
9 Leads for 5 HP and Smaller;
12 Leads for 7.5 HP to 125 HP;
Motors are U.L. Recognized, CSA Approved and CE Marked
Rubber Dust Flinger on Drive-End for F# 140T - 280T

Documentos